• SKJ Series Universal Rail Mounting Standard Screw Clamp Feed through terminal blocks, have useful features as follows:

• The terminal can be mounted on U type railway TH35-7.5 and G type railway G32- 15L,G32-18. the closed screw guiding hole can make it easy operate screwdriver.

• The universal accessories provided for terminals with several cross sectional area, e.g. clapboard, grouping plate, etc.

• Potential distribution can be realized through connecting to fixed central jumper or inserting into side jumper.

• Ground terminal and N line terminal with same figure of universal terminals, will be marked with SZB combined digital number for uniform identif-ication.

Order No.			01003
Dimensions
Width x Length x Height		(mm)	42.5/5.2/46.5
Nominal screw diameter		(mm)	M3
Torque		(Nm)	0.5-0.7
Stripping Length		(mm)	8
Parameter
Voltage Rating		(V)	800
Current Rating		(A)	32
Wire section		(mm²)	2.5
Wire Range
Rigidity wire range		(mm²)	1.0-4
Soft wire range		(mm²)	1.0-2.5
DIN Rails			Type	Order No.
Mountable rail type			G32-15L G32-18/15	02006 02007
			TH35-7.5	02005
End clapboard
			SKJ-G(DUK)	01028
Clapboard
Used for electric isolation between adjacent jumpers. After that, insert it.			SKJ-G(TS-K)	01030
Grouping clapboard
For the terminal group of visual and electrical isolation			SKJ-G(ATP-UK)	01029
Internal Jupmer
Used for transversely bridge conn- ected in the center of terminal block, according to actual operation the voltage can be distributed.	10 pole		SFBI 10-5	01040
	3 pole		SFBI 10-5N	01109
	2 pole
External Jumper
2 pole			SEB2-5	01057
3 pole			SEB3-5	01075
10 pole			SEB10-5	01051
Mark Tag
Blank			SZB5-10	01064
Pre-printed 10 no. Horz.			SZB5 (Horizontal)
Pre-printed 10 no. Vert.			SZB5 (Vertical)